Tech. Centres
-
Suction cups improve productivity
A single bellow stays more stable when in motion, allowing robots or production lines to run at higher speeds.
-
Photoelectrics set for tough environments
Fitted with 316L stainless steel housings for food and beverage applications.
-
Measure high laser powers without water cooling
Laser irradiates the sensor for a short time, from 0.1 to 1 s, and the energy of the pulse is used to calculate the power.
-
Data acquisition in Industry 4.0
Slave ethernet port links up to eight daisy-chained expansion modules and converts more than 100 channels to one IP address.
-
Carts keep shop valuables secure
Built with a welded steel frame, tubular steel push handle, steel-reinforced butcher block work surface.
-
Sensorless control for pumping systems
IPS 4000 operates in either a stand-alone mode or networked through the BMS to maximize performance.
-
High-temperature ovens ease welding
Workspace floor is reinforced for 3,000 lb. loading at removable subway grate.
-
Machine verification in real time
Complies with insurance audits and OSHA 29 CFR 1910.272 requirements.
-
BOA2 detects smaller defects
Sensor supports standard C-mount lenses to safeguard against accidental damage or tampering.
-
Pumps pass large solids easily
Flap valves prevent damage from product entrapment and settling of solids in intermittent-duty applications.
-
Pumps handle non-corrosive water conditions
Come in five sizes for diameters from 150 to 350 mm.
-
Imager captures thermal anomolies
32-times electronic zoom, and the still or video images are stored via microSD or USB2.0.
-
Connectors handle high vibrations, shock loads
Rated at 4 A per contact and 250 V.
-
ECO-HEAT maximizes diesel engine performance
Raises the engine load and heats the exhaust directly to save space and energy.
-
Converters fit in tight spaces
Eighteen models operate with 3.3, 5, 12, 15 and 24 VDC inputs and single outputs.
