Let there be LED light

Uses less space.

April 16, 2015   by PLANT Staff

07STAHLlampsR. STAHL’s compact 6036 series LED-based tubular light fittings for use in Ex zones 1/21 and 2/22 provide an alternative to typical linear luminaires.

The new lights, with a diameter of 55 mm, take up less than half the space required by conventional linears and are less than half their weight. For example, 30 4-ft.-long LED-based tubular light fittings ensure an illuminance of approximately 500 lx, which would normally require 35 linear luminaires with two 36 W fluorescent tubes each – or 48 conventional box-type units retrofitted with LEDs.

Specific power consumption per 100 lx is 1.5 W/m2.

The light fittings operate in a temperature range from -40 to 60 degrees C. Use them for general lighting or as machine lamps.

R. STAHL Ltd. is a manufacturer of safety technology for hazardous areas based in Waldenburg, Germany with Canadian offices in Edmonton.

Print this page

Related Stories

Leave a Reply

Your email address will not be published. Required fields are marked *