PLANT

Heavy-duty clean up

High capture efficiency.


02CamfilprofHandte EM Profi emulsion mist collectors from Camfil Air Pollution Control (APC) handle heavy clean ups for contaminants generated during milling, drilling, tapping, turning, grinding and other machining processes that use emulsion mist coolants.

The collector uses long-life coarse and fine filter demisters followed by a final-stage HEPA filter with combined efficiencies of 99.9% on particles of 0.3 micron and larger.

This is much higher than capture efficiencies achieved with fibreglass V-bag filters, which lose efficiency as media becomes saturated. A patented automatic sprayer counteracts emulsion clumping, ensuring that the separators operate 24/7 almost maintenance-free.

The unit is easily serviced from the ground by a single technician, eliminating extra manpower and lift equipment. Service life between change-outs is up to six years for demister filters and two years for HEPA filters.

Large maintenance doors and quick-clamping elements make tool-less filter replacement fast.

Basic modules handle air volumes from 1,700 to 8,000 cfm, with a wide range of accessories and configurations. Modules combine to accommodate larger airflow requirements. Small space-saving models handle low airflow applications of 500 to 1,400 cfm.

Camfil APC is a manufacturer of dust and fume collection systems based in Jonesboro, Ark.

Have your say:

Your email address will not be published. Required fields are marked *

*