Process fluid is continuously pushed from the centre of each tube to the wall and back, eliminating thermal gradients.
A reliable counterweight and mechanical springs counter balance the robot to shorten cycle times and improve accuracy.
Fitted with 22.5-mm mounting actuators that illuminate and are impact, vibration and shock resistant.
Equipped with TEFC motors as standard to 25 hp and come in 230, 460 or 575 V options.
An internal power supply drives the loop while finding ground faults and leakage current caused by corrosion or condensation.
Studs mount flush in the metal sheet for a clean and more attractive finished appearance
Sensors detect shaft, gate or slide position as well as object presence.
A single bellow stays more stable when in motion, allowing robots or production lines to run at higher speeds.
Fitted with 316L stainless steel housings for food and beverage applications.
Laser irradiates the sensor for a short time, from 0.1 to 1 s, and the energy of the pulse is used to calculate the power.
Slave ethernet port links up to eight daisy-chained expansion modules and converts more than 100 channels to one IP address.
Built with a welded steel frame, tubular steel push handle, steel-reinforced butcher block work surface.
IPS 4000 operates in either a stand-alone mode or networked through the BMS to maximize performance.
Workspace floor is reinforced for 3,000 lb. loading at removable subway grate.
Complies with insurance audits and OSHA 29 CFR 1910.272 requirements.